315T Toggle-type extrusion press

315T Toggle-type extrusion press

A. Application
The horizontal 3150 KN metal toggle-type extruders produced by our company,are apt to press ferrous metals.The press of this series are usually used to produce aluminum con for condenser, pesticide, chemical,cars,drinking bottle,cosmetics bottle and outer casing of shell etc. Which also are used to press and cut .
B .Operation regime
1.Inching:for machine adjustment.
2.Simple stroke:for experiment.
3.Continuous stroke: for normal operation.
C. Structure and Characteristics
The machine is consisted of toggle and crankshaft pitman, for greater rigidity ,the machine is designed to have both casting and steel plate structures.The main driving is composed of spurgear, crankshaft and pitman..Clutch is multipe pneumatic friction disks type.Clutch and brake are interlocked positively.
Slide components consists of slide,toggle,speed regulating pitman and distance adjustment device,etc.And the machine is also consisted of high rotation motor.
The machine is also provided with a manual die changer for die set height

JC88-315 Horizontal Cold Extrusion Press

JC88-315 Horizontal Cold Extrusion Presses make the aluminum,zinc,magnesium,copper and other non-ferrous metal into parts by the backward extrusion and combined extrusion. The presses are usually used to produce filter aluminum cans,capacitor cans,chemical bottle, drinking bottle,wine cans and so on. The machines are designed to have both casting and steel plate structures with high strenght and good rigidity,compared with similar press,our presses with high efficiency can make 80 parts per minute,the parts that the press make are accurate,the surface of the parts is smooth,and they are a little or non-chip advanced equipments. These machines are equipped with automatic loading devices, ejectors,auto-cycle lubrication system and fault protection system to meet customers’ need .

Specifications

ItemJC88-315

Nominal pressure3150 KN

Nominal pressure stroke 10 mm

Stroke of slide 270 mm

Stroke per minute 80 min^-1

Max shut height 660 mm

Adjustment of shut height 12 mm

Max diameter of blank